Puddle Lights Installation:
1. Use a flat blade screwdriver to pop out the factory LED light (there is a little notch at the side of the light, just dig in there with the screwdriver, twist a little and the light will come out);
2. Push a small black clip down and the light will be removed from the cable;
3. Grab the LED light and push back to the connector. If there is a click sound, it means the light is connected to the cable successfully;
4. Before pushing the light down, please make sure the light has the orientation of the image that you prefer. At last, snap it into place.
Package: 2X Tesla Puddle Lights
Note- If you wanted lights in the front and back doors, you would NEED to order 2 sets.